فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها



گروه تخصصی










متن کامل


اطلاعات دوره: 
  • سال: 

    2024
  • دوره: 

    17
  • شماره: 

    1
  • صفحات: 

    219-232
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    26
  • دانلود: 

    0
چکیده: 

For the purpose of automatic generation control (AGC), a portion of the propeller hydro-turbine units in China is adjusted to operate within a restricted range of 75%-85% load using computer-controlled AGC strategies. In engineering applications, it has been observed that when a propeller hydro-turbine unit operates under off-design conditions, a large-scale Vortex rope would occur in the draft tube, leading to significant pressure fluctuations. Injecting air into the draft tube to reduce the amplitude of pressure fluctuations is a common practice, but its effectiveness has not been proven on propeller hydro-turbine units. In this study, a CFD model of a propeller hydro-turbine was established, and 15 cases with different guide vane openings (GVO, between 31° and 45°) under unsteady conditions were calculated and studied. Two air admission measures were introduced to suppress the Vortex rope oscillation in the draft tube and to mitigate pressure fluctuations. The reason for the additional energy loss due to air admission was then explained by the entropy production theory, and its value was quantified. This study points out that when injecting air, it is necessary to first consider whether the air will obstruct the flow in the draft tube. Finally, based on simulation and experimental data under various load conditions, pressure fluctuation analysis (based on fast Fourier transform, FFT) was conducted to assess the effectiveness of air admission measures. This study can provide an additional option for balancing unit efficiency and stability when scheduling units using an AGC strategy.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 26

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    49
  • شماره: 

    3 (پیاپی 88)
  • صفحات: 

    299-307
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    495
  • دانلود: 

    157
چکیده: 

در این مقاله جریان سیال در درفت تیوب توربین فرانسیس یک مدل آزمایشگاهی در دو حالت با تزریق و بدون تزریق آب به صورت غیر پایا در دو هندسه واقعی و دیفیوزر مستقیم شبیه سازی شده و همچنین روشی نوین برای انتخاب قطر نازل پیشنهاد شده است. شبیه سازی با استفاده از نرم افزار فلوئنت و مدل های آشفتگی k-ε در هندسه دیفیوزر مستقیم و SST k-ω در هندسه واقعی انجام شده است. در دو هندسه، نتایج حاصل از روش پیشنهادی برای انتخاب قطر نازل که بر اساس نسبت افت کلی به ضریب بازیافت فشار بوده با روش مورد استفاده در تحقیقات پیشین که بر اساس محاسبه افت کلی می باشد، مقایسه شده است. شرایط مرزی ورودی و صحت سنجی بر اساس داده های آزمایشگاهی بوده است. نتایج حاصل نشان می دهند اندازه قطر نازل بدست آمده وابسته به هندسه درفت تیوب بوده و استفاده از روش پیشنهادی برای انتخاب قطر نازل بر اساس نسبت افت کلی به ضریب بازیافت فشار موجب افزایش 33 درصدی قطر نازل انتخاب شده، کاهش 3/16 درصدی نوسان های سرعت و 19 درصدی دامنه نوسانی فشار در درفت تیوب می شود.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 495

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 157 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Kumar S. | Cervantes M.J. | Gandhi B.K.

اطلاعات دوره: 
  • سال: 

    2024
  • دوره: 

    17
  • شماره: 

    4
  • صفحات: 

    770-784
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    21
  • دانلود: 

    0
چکیده: 

The hydraulic turbines, especially Francis turbines, frequently run at part load (PL) conditions to meet the dynamic energy needs. The flow field at the runner exit changes significantly with a change in the operating point. At PL, flow instabilities such as the Rotating Vortex rope (RVR) form in the draft tube of the Francis turbine. The present paper compares the features of the velocity and vorticity field of the Francis turbine draft tube at the best efficiency point (BEP) and PL operations using the Proper Orthogonal Decomposition (POD) of the 2D-PIV data. The POD analysis decomposes the flow field into coherent and incoherent structures describing the spatiotemporal behavior of the flow field. A visual representation of the coherent structures and the turbulent length scales in the flow field is extracted and analyzed for BEP and PL, respectively. The study highlights the salient features of the draft tube flow field, which differentiate the BEP and PL operation. The fast Fourier transform of the temporal coefficients confirms the presence of RVR frequency (0.29 times the runner frequency) at PL. The phase portraits of different modes elucidate the relationship between different harmonics of the RVR frequency at PL.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 21

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1393
  • دوره: 

    14
  • شماره: 

    15 (فوق العاده)
  • صفحات: 

    352-360
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    672
  • دانلود: 

    185
چکیده: 

نوسانات شدید فشار ناشی از طناب گردابه در مخروطی زیر چرخ و لوله مکش پمپ-توربین در عملکرد بار جزئی حالت توربینی، باعث ایجاد ارتعاشات شدید، سر و صدا و افت عملکرد می شود. متداول ترین روش برای کاهش این نوسانات تزریق هوا از محور توربین است. این روش دارای مشکلاتی نظیر تاثیر منفی بر بازده، هزینه زیاد و پیچیدگی فنی بالا می باشد. در این مقاله، به منظور غلبه بر این مشکلات، ایجاد شیار بر روی سطح مخروطی چرخ به منظور کاهش نوسانات و تغییرات فشار در لوله مکش و به تبع آن کاهش ارتعاشات توربین در دو حالت پمپی و توربینی مطالعه شده است. در این راستا ابتدا هندسه چرخ و لوله مکش بر اساس مشخصات هیدرولیکی و اطلاعات موجود از نیروگاه سیاه بیشه طراحی شده است. در ادامه میدان سه بعدی جریان با استفاده از نرم افزار انسیس سی اف ایکس تحلیل و درستی نتایج با بررسی استقلال حل از شبکه و مقایسه با نتایج تجربی راستی آزمایی شده اند. بیشترین اختلاف بین عملکرد طراحی انجام شده و طرح واقعی کمتر از 2 درصد می باشد. نتایج نشان می دهد که ایجاد شیار بروی سطح مخروطی چرخ در حالت توربینی باعث افزایش سرعت زیر مخروطی چرخ، کاهش تغییرات فشار و همچنین کاهش مساحت نواحی کم فشار در ابتدای لوله مکش می شود. بیشترین کاهش تغییرات فشار در ایتدای لوله مکش در دو وضعیت بازشدگی پره های هادی کمتر از 60% و بیشتر از 90% نقطه اسمی اتفاق می افتد. افزون بر این، حداکثر افت بازده در طرح اصلاح شده کمتر از 0.3 درصد بوده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 672

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 185 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

LIEBERMAN L.J. | SCHEDLIN H.

اطلاعات دوره: 
  • سال: 

    2009
  • دوره: 

    103
  • شماره: 

    3
  • صفحات: 

    173-178
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    100
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 100

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1394
  • دوره: 

    14
  • شماره: 

    11
  • صفحات: 

    166-174
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    815
  • دانلود: 

    197
چکیده: 

لوله گردبادی دوجداره لوله گردبادی معمولی است که اجازه عبور دوباره جریان از روی لوله گرم را می دهد و برای اولین بار در این مقاله معرفی می شود. جریان در این طرح جدید، پس از عبور از شیر مخروطی اجازه پیدا نمی کند تا از خروجی گرم خارج شود، بلکه مجددا از روی لوله گرم می گذرد و اتلاف حرارتی لوله گرم را افزایش می دهد. برای بررسی میزان جدایش دمایی که بوسیله لوله گردبادی دو جداره اتفاق می افتد، عملکرد این لوله گردبادی بصورت تجربی آزمایش و با عملکرد لوله گردبادی معمولی مقایسه شده است. آزمایش برای فشار ثابت 4 بار، با گاز طبیعی انجام می شود. نسبت طول لوله به قطر لوله گرم در هر دو نمونه لوله گردبادی 10 می باشد. قطر اریفیس سرد هر دو ژنراتور 6.4 میلیمتر است. مشاهده گردید عبور مجدد جریان از روی لوله گرم در لوله گردبادی دو جداره، بازده سرمایشی لوله گردبادی معمولی را 24% در نقطه حداکثر اختلاف دمای سرد بهبود بخشیده است. کسر جرمی سرد که در آن حداقل دمای سرد در لوله گردبادی دو جداره اتفاق می افتد کمتر از مقدار مربوط به لوله گردبادی معمولی می باشد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 815

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 197 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسندگان: 

SAMARAS R.K. | SKOP R.A. | MILBURN D.A.

اطلاعات دوره: 
  • سال: 

    1974
  • دوره: 

    96
  • شماره: 

    -
  • صفحات: 

    1130-1135
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    120
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 120

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1387
  • دوره: 

    1
  • شماره: 

    3 (پیاپی 3)
  • صفحات: 

    35-42
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1020
  • دانلود: 

    250
چکیده: 

در گذشته تلاش های بسیاری برای بهبود توربین های گازی صورت گرفته است که هدف از آنها افزایش نیروی پیشرانه و همچنین خنک ماندن دیواره موتور بوده است. در این راستا استفاده از موتورهای سیکلونی و موتور ورتکسی پیشنهاد شده است. جریان چرخشی دو جهته Bidirectional Swirl، در موتور ورتکسی ایجاد می شود و با توجه به افزایش راندمان موتور و خنک ماندن دیواره آن، در سالهای اخیر نظر محققین را به خود جلب کرده است. در موتور ورتکسی با توجه به هندسه خاص دو جریان ورتکس (Vortex) ایجاد می شود که در ورتکس داخلی احتراق صورت گرفته و ورتکس خارجی از انتقال حرارت به دیواره محافظت می کند. موتور ورتکسی با سوخت و اکسید کننده گازی در دانشگاه Virginia Institute of Technology در ابعاد آزمایشگاهی ساخته و تحت بررسی است. استفاده عملی موتور ورتکسی با سوخت مایع و گازی نیز حایز اهمیت می باشد. بررسی و تحلیل میدان جریان در چنین محفظه ای در پنج سال گذشته در مراکز تحقیقاتی مختلف صورت یافته است که نتیجه قابل ذکر آن، حل تحلیلی و عددی میدان جریان با شرایط بسیار ساده کننده بوده است. انتخاب مواد مناسب، تعیین ابعاد موتور، طراحی صفحه انژکتور و سایر پارامترهای ساخت موتور نیازمند مدل سازی میدان جریان در محفظه احتراق می باشد که خود مستلزم حل معادلات حاکم است. برای بررسی میدان جریان در محیط ورتکسی نیاز به حل معادلات بقا جرم، مومنتوم و انرژی می باشد. در صورت آشفته بودن جریان، معادلات بسیار پیچیده شده و برای حل استفاده از فرضیات بسیاری برای ساده سازی مساله ضروری است. لازم به ذکر است که با فرض جریان غیرقابل تراکم، معادله انرژی از سایر معادلات جدا خواهد شد. هدف از این پروژه بررسی حل تحلیلی انجام یافته و بهبود آن برای همخوانی با سایر نتایج عددی و تجربی با شرایط مشابه، بررسی عددی معادلات حاکم با حداقل فرضیات و مقایسه نتایج عددی و تحلیلی با یکدیگر می باشد. با توجه به غیر خطی بودن معادلات و همچنین آشفته بودن جریان امکان حل تحلیلی آن، با جزییات زیاد، وجود ندارد. لذا با استفاده از نتایج حل عددی و در نظر گرفتن مدلهای متداول، جریان مدل شده و نتایج ارایه خواهند شد. لازم به ذکر است که در صورت استفاده از سوخت مایع، مدل سازی احتراق اسپری در محیطی با جریان دو فازی (گاز– مایع) نیز مورد نیاز است که در این مورد نیز توضیحاتی داده خواهد شد. با استفاده از تحلیل میدان جریان، نتایج بررسی پیشرانشی و آیرودینامیکی موتور در دسترس قرار می گیرد که برای تعیین پارامترهای طراحی و ساخت بستر آزمون موتور ورتکسی ضروری می باشند. در ادامه، با تعیین نیازهای اساسی برای نصب دستگاه مناسب برای آزمایش موتور ورتکسی، به بررسی ساخت بستر آزمون موتور ورتکسی و تجهیزات جانبی آن خواهیم پرداخت. نتایج بدست آمده در این پروژه شامل بررسی میدان جریان، طراحی و ساخت بستر آزمون، گام اولیه در راستای ساخت موتور ورتکسی با سوخت گازی و مایع و در ابعاد صنعتی محسوب می شود که با توجه به نوآوری و راندمان بالای این موتور از اهمیت خاصی برخوردار خواهد بود.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1020

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 250 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Li J. | Wang C. | Ding H. | Sun H.

اطلاعات دوره: 
  • سال: 

    2022
  • دوره: 

    15
  • شماره: 

    3
  • صفحات: 

    857-872
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    37
  • دانلود: 

    0
چکیده: 

To investigate the dynamics of droplet-Vortex interactions in particle-laden Karman Vortex street flows, the simulations were carried out by using Euler-Lagrange approach, which was validated by the available experiments and numerical results. Then, the particle dispersion and the dimensionless frequency (Strouhal number) of the wake flow were analyzed to evaluate the particle-Vortex interactions. The particle dispersion was statistically analyzed from both time and space dimensions and the different instantaneous dispersion patterns were explained by the relative slip velocity. Two independent scaling parameters, Stokes number StL and particle-fluid mass loading ratio Φ were revealed, and the particle mean square displacement and the Strouhal number were modelled by using these two scaling parameters, respectively. Finally, the characteristic lengths of the particle-laden wake flow were researched, and the Strouhal number physical model was developed based on the oscillating fishtail model. The results indicated that, firstly, StL and Φ, which constitute a dominant scaling group, can characterize the dynamics of droplet-Vortex interactions in wake flow. Particles gradually separate from the Vortex with the increase of StL due to the centrifugal effect, and the Vortex intensity and regularity get worse with the increase of Φ, which further disperses the droplets for their momentum exchange with irregular Vortex structures. Secondly, the length of the formation region and the width of the free shear layer diffuse are the two simultaneous characteristic lengths of the Strouhal number in oscillating wake. The proposed Strouhal number model gives a physical basis for the frequency determination, and the predicted errors are within ±1. 5% error bands with mean absolute percentage error of 0. 67%.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 37

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

اطلاعات دوره: 
  • سال: 

    2020
  • دوره: 

    31
  • شماره: 

    -
  • صفحات: 

    881-886
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    49
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 49

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button